Molecular engineering

From Wikipedia, the free encyclopedia

Molecular engineering is an emerging field of study concerned with the design and testing of molecular properties, behavior and interactions in order to assemble better materials, systems, and processes for specific functions. This approach, in which observable properties of a macroscopic system are influenced by direct alteration of a molecular structure, falls into the broader category of “bottom-up” design.

Molecular engineering deals with material development efforts in emerging technologies that require rigorous rational molecular design approaches towards systems of high complexity.

Molecular engineering is highly interdisciplinary by nature, encompassing aspects of chemical engineering, materials science, bioengineering, electrical engineering, physics, mechanical engineering, and chemistry. There is also considerable overlap with nanotechnology, in that both are concerned with the behavior of materials on the scale of nanometers or smaller. Given the highly fundamental nature of molecular interactions, there are a plethora of potential application areas, limited perhaps only by one's imagination and the laws of physics. However, some of the early successes of molecular engineering have come in the fields of immunotherapy, synthetic biology, and printable electronics (see molecular engineering applications).

Molecular engineering is a dynamic and evolving field with complex target problems; breakthroughs require sophisticated and creative engineers who are conversant across disciplines. A rational engineering methodology that is based on molecular principles is in contrast to the widespread trial-and-error approaches common throughout engineering disciplines. Rather than relying on well-described but poorly-understood empirical correlations between the makeup of a system and its properties, a molecular design approach seeks to manipulate system properties directly using an understanding of their chemical and physical origins. This often gives rise to fundamentally new materials and systems, which are required to address outstanding needs in numerous fields, from energy to healthcare to electronics. Additionally, with the increased sophistication of technology, trial-and-error approaches are often costly and difficult, as it may be difficult to account for all relevant dependencies among variables in a complex system. Molecular engineering efforts may include computational tools, experimental methods, or a combination of both.

History[edit]

Molecular engineering was first mentioned in the research literature in 1956 by Arthur R. von Hippel, who defined it as "… a new mode of thinking about engineering problems. Instead of taking prefabricated materials and trying to devise engineering applications consistent with their macroscopic properties, one builds materials from their atoms and molecules for the purpose at hand."[1] This concept was echoed in Richard Feynman's seminal 1959 lecture There's Plenty of Room at the Bottom, which is widely regarded as giving birth to some of the fundamental ideas of the field of nanotechnology. In spite of the early introduction of these concepts, it was not until the mid-1980s with the publication of Engines of Creation: The Coming Era of Nanotechnology by Drexler that the modern concepts of nano and molecular-scale science began to grow in the public consciousness.

The discovery of electrically conductive properties in polyacetylene by Alan J. Heeger in 1977[2] effectively opened the field of organic electronics, which has proved foundational for many molecular engineering efforts. Design and optimization of these materials has led to a number of innovations including organic light-emitting diodes and flexible solar cells.

Applications[edit]

Molecular design has been an important element of many disciplines in academia, including bioengineering, chemical engineering, electrical engineering, materials science, mechanical engineering and chemistry. However, one of the ongoing challenges is in bringing together the critical mass of manpower amongst disciplines to span the realm from design theory to materials production, and from device design to product development. Thus, while the concept of rational engineering of technology from the bottom-up is not new, it is still far from being widely translated into R&D efforts.

Molecular engineering is used in many industries. Some applications of technologies where molecular engineering plays a critical role:

Consumer Products[edit]

Energy Harvesting and Storage[edit]

Environmental Engineering[edit]

  • Water desalination (e.g. new membranes for highly-efficient low-cost ion removal)[12]
  • Soil remediation (e.g. catalytic nanoparticles that accelerate the degradation of long-lived soil contaminants such as chlorinated organic compounds)[13]
  • Carbon sequestration (e.g. new materials for CO2 adsorption)[14]

Immunotherapy[edit]

Synthetic Biology[edit]

  • CRISPR - Faster and more efficient gene editing technique
  • Gene delivery/gene therapy - Designing molecules to deliver modified or new genes into cells of live organisms to cure genetic disorders
  • Metabolic engineering - Modifying metabolism of organisms to optimize production of chemicals (e.g. synthetic genomics)
  • Protein engineering - Altering structure of existing proteins to enable specific new functions, or the creation of fully artificial proteins
  • DNA-functionalized materials - 3D assemblies of DNA-conjugated nanoparticle lattices[17]

Techniques and instruments used[edit]

Molecular engineers utilize sophisticated tools and instruments to make and analyze the interactions of molecules and the surfaces of materials at the molecular and nano-scale. The complexity of molecules being introduced at the surface is increasing, and the techniques used to analyze surface characteristics at the molecular level are ever-changing and improving. Meantime, advancements in high performance computing have greatly expanded the use of computer simulation in the study of molecular scale systems.

Computational and Theoretical Approaches[edit]

An EMSL scientist using the environmental transmission electron microscope at Pacific Northwest National Laboratory. The ETEM provides in situ capabilities that enable atomic-resolution imaging and spectroscopic studies of materials under dynamic operating conditions. In contrast to traditional operation of TEM under high vacuum, EMSL's ETEM uniquely allows imaging within high-temperature and gas environments.

Microscopy[edit]

Molecular Characterization[edit]

Spectroscopy[edit]

Surface Science[edit]

Synthetic Methods[edit]

Other Tools[edit]

Research / Education[edit]

At least three universities offer graduate degrees dedicated to molecular engineering: the University of Chicago,[18] the University of Washington,[19] and Kyoto University.[20] These programs are interdisciplinary institutes with faculty from several research areas.

The academic journal Molecular Systems Design & Engineering[21] publishes research from a wide variety of subject areas that demonstrates "a molecular design or optimisation strategy targeting specific systems functionality and performance."

See also[edit]

General topics[edit]

References[edit]

  1. ^ von Hippel, Arthur R (1956). "Molecular Engineering". Science. 123 (3191): 315–317. Bibcode:1956Sci...123..315V. doi:10.1126/science.123.3191.315. JSTOR 1750067. PMID 17774519.
  2. ^ Chiang, C. K. (1977-01-01). "Electrical Conductivity in Doped Polyacetylene". Physical Review Letters. 39 (17): 1098–1101. Bibcode:1977PhRvL..39.1098C. doi:10.1103/PhysRevLett.39.1098.
  3. ^ Gallo, Jiri; Holinka, Martin; Moucha, Calin S. (2014-08-11). "Antibacterial Surface Treatment for Orthopaedic Implants". International Journal of Molecular Sciences. 15 (8): 13849–13880. doi:10.3390/ijms150813849. PMC 4159828. PMID 25116685.
  4. ^ Huang, Jinhua; Su, Liang; Kowalski, Jeffrey A.; Barton, John L.; Ferrandon, Magali; Burrell, Anthony K.; Brushett, Fikile R.; Zhang, Lu (2015-07-14). "A subtractive approach to molecular engineering of dimethoxybenzene-based redox materials for non-aqueous flow batteries". J. Mater. Chem. A. 3 (29): 14971–14976. doi:10.1039/c5ta02380g. ISSN 2050-7496.
  5. ^ Wu, Mingyan; Xiao, Xingcheng; Vukmirovic, Nenad; Xun, Shidi; Das, Prodip K.; Song, Xiangyun; Olalde-Velasco, Paul; Wang, Dongdong; Weber, Adam Z. (2013-07-31). "Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes". Journal of the American Chemical Society. 135 (32): 12048–12056. doi:10.1021/ja4054465. PMID 23855781. S2CID 12715155.
  6. ^ Choi, Jaecheol; Kim, Kyuman; Jeong, Jiseon; Cho, Kuk Young; Ryou, Myung-Hyun; Lee, Yong Min (2015-06-30). "Highly Adhesive and Soluble Copolyimide Binder: Improving the Long-Term Cycle Life of Silicon Anodes in Lithium-Ion Batteries". ACS Applied Materials & Interfaces. 7 (27): 14851–14858. doi:10.1021/acsami.5b03364. PMID 26075943.
  7. ^ Tan, Shi; Ji, Ya J.; Zhang, Zhong R.; Yang, Yong (2014-07-21). "Recent Progress in Research on High-Voltage Electrolytes for Lithium-Ion Batteries". ChemPhysChem. 15 (10): 1956–1969. doi:10.1002/cphc.201402175. ISSN 1439-7641. PMID 25044525.
  8. ^ Zhu, Ye; Li, Yan; Bettge, Martin; Abraham, Daniel P. (2012-01-01). "Positive Electrode Passivation by LiDFOB Electrolyte Additive in High-Capacity Lithium-Ion Cells". Journal of the Electrochemical Society. 159 (12): A2109–A2117. doi:10.1149/2.083212jes. ISSN 0013-4651.
  9. ^ "New Laminar Batteries | Printed Electronics World". 2007-05-18. Retrieved 2016-08-06.
  10. ^ Nokami, Toshiki; Matsuo, Takahiro; Inatomi, Yuu; Hojo, Nobuhiko; Tsukagoshi, Takafumi; Yoshizawa, Hiroshi; Shimizu, Akihiro; Kuramoto, Hiroki; Komae, Kazutomo (2012-11-20). "Polymer-Bound Pyrene-4,5,9,10-tetraone for Fast-Charge and -Discharge Lithium-Ion Batteries with High Capacity". Journal of the American Chemical Society. 134 (48): 19694–19700. doi:10.1021/ja306663g. PMID 23130634.
  11. ^ Liang, Yanliang; Chen, Zhihua; Jing, Yan; Rong, Yaoguang; Facchetti, Antonio; Yao, Yan (2015-04-11). "Heavily n-Dopable π-Conjugated Redox Polymers with Ultrafast Energy Storage Capability". Journal of the American Chemical Society. 137 (15): 4956–4959. doi:10.1021/jacs.5b02290. PMID 25826124.
  12. ^ Surwade, Sumedh P.; Smirnov, Sergei N.; Vlassiouk, Ivan V.; Unocic, Raymond R.; Veith, Gabriel M.; Dai, Sheng; Mahurin, Shannon M. (2015). "Water desalination using nanoporous single-layer graphene". Nature Nanotechnology. 10 (5): 459–464. Bibcode:2015NatNa..10..459S. doi:10.1038/nnano.2015.37. OSTI 1185491. PMID 25799521.
  13. ^ He, Feng; Zhao, Dongye; Paul, Chris (2010-04-01). "Field assessment of carboxymethyl cellulose stabilized iron nanoparticles for in situ destruction of chlorinated solvents in source zones". Water Research. 44 (7): 2360–2370. doi:10.1016/j.watres.2009.12.041. PMID 20106501.
  14. ^ Pelley, Janet. "Better Carbon Capture Through Chemistry | Chemical & Engineering News". cen.acs.org. Retrieved 2016-08-06.
  15. ^ Black, Matthew; Trent, Amanda; Kostenko, Yulia; Lee, Joseph Saeyong; Olive, Colleen; Tirrell, Matthew (2012-07-24). "Self-Assembled Peptide Amphiphile Micelles Containing a Cytotoxic T-Cell Epitope Promote a Protective Immune Response In Vivo". Advanced Materials. 24 (28): 3845–3849. Bibcode:2012AdM....24.3845B. doi:10.1002/adma.201200209. ISSN 1521-4095. PMID 22550019. S2CID 205244562.
  16. ^ Acar, Handan; Ting, Jeffrey M.; Srivastava, Samanvaya; LaBelle, James L.; Tirrell, Matthew V. (2017). "Molecular engineering solutions for therapeutic peptide delivery". Chemical Society Reviews. 46 (21): 6553–6569. doi:10.1039/C7CS00536A. ISSN 0306-0012. PMID 28902203.
  17. ^ Lequieu, Joshua; Córdoba, Andrés; Hinckley, Daniel; de Pablo, Juan J. (2016-08-17). "Mechanical Response of DNA–Nanoparticle Crystals to Controlled Deformation". ACS Central Science. 2 (9): 614–620. doi:10.1021/acscentsci.6b00170. ISSN 2374-7943. PMC 5043426. PMID 27725959.
  18. ^ "Institute for Molecular Engineering". ime.uchicago.edu. Retrieved 2016-08-06.
  19. ^ "Molecular Engineering & Sciences Institute". www.moles.washington.edu. Retrieved 2016-08-06.
  20. ^ "Top page - Kyoto University, Department of Molecular Engineering". www.ml.t.kyoto-u.ac.jp. Retrieved 2016-08-06.
  21. ^ "Molecular Systems Design & Engineering". Royal Society of Chemistry. July 31, 2014. Retrieved August 6, 2016.